Movin' & Lubin' Logo
Napa AutoCare Center Logo
We Use the Good Stuff!
Front page news in the Journal Sentinel
New Location in New Berlin
Categories

Air Conditioning (11)
Alignment (16)
Alternator (2)
Auto Safety (6)
Automotive News (9)
Battery (13)
Brakes (14)
Cabin Air Filter (8)
Check Engine Light (2)
Cooling System (17)
Customer Detective Work (1)
Dashboard (3)
Diagnostics (5)
Diesel Maintenance (1)
Differential Service (3)
Drive Train (9)
Emergency Items (1)
Engine Air Filter (2)
Exhaust (8)
Fluids (17)
Fuel Economy (7)
Fuel Saving Tip: Slow Down (2)
Fuel System (48)
Headlamps (4)
Inspection (6)
Keys to a long lasting vehicle (4)
Maintenance (62)
Monitoring System (3)
Oil Change (2)
Older Vehicles (4)
Parts (10)
Safe Driving (1)
Safety (6)
Serpentine Belt (3)
Service Intervals (10)
Service Standards (13)
Shocks & Struts (9)
Spark Plugs (1)
Steering (11)
Suspension (2)
Timing Belt (8)
Tire Rotation and Balancing (2)
Tires (3)
Tires and Wheels (43)
TPMS (1)
Transmission (7)
Warranty (2)
Water Pump (1)
What Customers Should Know (46)
Wheel Bearings (1)
Windshield Wipers (8)
Winter Prep (1)

Auto Repair Milwaukee Tire Safety: Washington vs. Lincoln

Welcome to the Auto Repair Milwaukee automotive blog. Today, let's talk about the effect of tire wear.

Let's focus on stopping in wet Milwaukee conditions. In order for a tire to have good contact with the road, it has to move the water out of the way. If it can't move the water, the tire will actually ride on top of a thin film of water.

That's called hydroplaning. If it's really bad, Milwaukee drivers can actually spin out of control - endangering themselves and the other drivers around them. At best, you won't stop as fast.

So how does a tire move water? It has channels for water to flow through. Look at your vehicle tire and you'll see channels: channels that run around the tire and channels that flow across the tire. They're designed to direct water away from the tire so it can contact the road better.

And the deeper the channel, the more water it can move. A brand new Auto Repair Milwaukee tire has very deep channels and can easily move a lot of water. As the tire wears down, the channels become shallower and can move less water. When it wears down enough, it can seriously affect your ability to stop your vehicle on wet Milwaukee roads.

So that's why it's so important for Milwaukee drivers to replace their vehicle tires when they get worn. Consumer Reports and other advocate groups call for a standard of 3/32 of an inch and they have the studies to prove it.

At Auto Repair Milwaukee, we want our customers to know that the deeper recommended tread depth makes a big difference. Stopping distances are cut dramatically on wet Milwaukee streets. A safe stop from Wisconsin speeds with 4/32 of an inch of tread would result in a crash with worn out tires.

There's an easy way to tell when a tire's worn to 4/32 of an inch.

Just insert a quarter into the tread. Put it in upside down. If the tread doesn't cover George Washington's hairline, it's time to replace your vehicle tires. With a Canadian quarter, the tread should cover the numbers in the year stamp.

Many Milwaukee residents have heard of this technique using a penny and Abe Lincoln's head - the old method. That measure gives you 2/32 of an inch – half the suggested amount. Of course, vehicle tires are a major purchase. Most of us in Milwaukee want to get as many miles out of them as we can. But there's a real safety trade-off. It's your choice.

Auto Repair Milwaukee
1595 s 38th
Milwaukee, Wisconsin 53215
414-482-0796